Guardian Fall Protection

Questions?Contact Us at 1.800.466.6385!


FAQs » Anchor Points

FAQs

Anchor Points

Can you use a CB-1-W (00610) in a permanent application?

Yes, you will have to use a galvanized spray so it will prevent corrosion.

Can a Temper Anchor (00455) be used on a flat application?

Yes, the Temper Anchor has been tested and approved for flat application.

What is the screw size needed for the CB-12 Roof Anchor (00645)?

The screw size for the CB-12 anchor is a #14.

What pitches of roof does a Two-Way Standing Seam Roof Anchor (10600) fit?

The Standing Seam Roof Anchor fits all roof pitches.

If using a metal roof anchor that is thinner than 20-gauge, what type of anchor should be used?

CB-12 Roof Anchor (00645) can be used on 22-gauge metal roof.

Do Ridge-It anchors (00500, 00510, 00515) fit on a flat roof?

Yes, Ridge-It anchors fit on a flat roof.

What is the weight for Hammer Mobile Fall Arrest System (14000)?

The weight of the Hammer Mobile Fall Arrest System is 1050 pounds.

Does the Mega Swivel 10K Anchor for Concrete (00238) come with backer plate? 14” bolt?

No, the Mega Swivel does not come with a backer plate, but it does come with a 14” bolt.

Is the Snappy Anchor (00710, 00711) rated at 5,000 pounds?

Yes, the Snappy Anchor is rated for 5,000 pounds and can be used for fall arrest or restraint.

Is the Wire Hook Anchorage (01860) a 5,000 pound anchor point?

Yes, the wire hook anchor is a 5,000 pound anchor point.

Is the Standing Seam Roof Clamp (00250) a 5,000 pound anchor point?

No, the Standing Seam Roof Clamp is only rated at 3,600 pounds.

Do you have any recommendations for use of the Angel Anchor System in wet conditions?

If you are able to dry the area in which you plan to use the Angel Anchor then you can use it but if the surface is wet, you cannot use this anchor unfortunately.